Hỗ trợ trực tuyến
Tư vấn bán hàng
Mr Hậu 0914 206655
Tư vấn Giải pháp Kỹ thuật
Mr Khánh 0914 377 611
Tư vấn kỹ thuật
Góc tư vấn
Dịch vụ lắp dựng
Lan truyền Hakel PIIIM-275 DS/1+1
Mã sản phẩm: PIIIM-275 DS/1+1
Nhà sản xuất: Hakel
1.650.000₫
Chống sét lan truyền cho hệ thống điện nguồn PIIIM-275 DS/1+1 do Czech sản xuất, Nhập khẩu bởi công ty chống sét Gia Anh, sử dụng rất phổ biến cho Type 1 + 2, và đem lại hiệu quả...
- Model : PIIIM-275 DS/1+1
- Thương hiệu : Hakel
- Nước sx : Czech
- Lắp đặt cho đường nguồn điện 1 pha ( 1 dây nóng và 1 dây lạnh )
Test class according to EN 61643-11 ed. 2 and IEC 61643-11 | TYP 2, CLASS II | |
Network type | TN-S TT |
|
Maximum continuous operating voltage | UC | 275 V AC / 350 V DC |
Maximum discharge current | Imax | 50 kA |
Nominal discharge current for class II test (8/20) L/N | In | 20 kA |
Nominal discharge current for class II test (8/20) N/PE | In | 20 kA |
Total discharge current (8/20 µs) L+N->PE | Itotal | 50 kA |
Voltage protection level | Up | < 1,3 kV |
Impulse discharge current for class I test (10/350) N/PE | Iimp | 20 kA |
Temporary overvoltage (TOV) L/N | UT | 335 V/5 s |
Temporary overvoltage (TOV) N/PE | UT | 1200 V/0,2 s |
Response time L/N | tA | < 25 ns |
Response time N/PE | tA | < 100 ns |
Max. back-up fuse | 160 A gL/gG | |
Short-circuit withstand capability 160 A gL/gG | ISCCR | 60 kArms |
LPZ | 1-2 | |
Housing material | Polyamid PA6, UL94 V-0 | |
Degree of protection of enclosure | IP20 | |
Operating temperature | -40°C ... +80 °C | |
Cross-section of the connected conductors (at tightening moment of clamps 3 Nm) | 25 mm2 (wire) 16 mm2 (solid) |
|
Method of assembly | DIN rail 35 mm | |
Failure signalisation (S) | pushed in - ok / pushed out - failure | |
Potential free signal contact (DS) (recommended cross-section of remote monitoring max.1 mm2) | AC: 250 V / 0,5 A, DC: 250 V / 0,1 A | |
Lifetime | min. 100 000 h | |
Weight | m | 174 g |
Article number | 24 145 |
---------------------------------------
Tư vấn bán hàng: 0914377611